HP Storage Essentials NAS Manager Software - Manual (Page 73)

Storage Essentials 5.1 User Guide 41
Type the password for the SMI-S proxy server.
This field can be left blank if one or more of the following conditions exists:
• The proxy server's user name and password are one of the default user names and
passwords.
• The proxy server does not require authentication.
• Fabric Access API
Type the corresponding password for the switch.
This field can be left blank if one or more of the following conditions are fulfilled:
• The element's user name and password are one of the default user names and
passwords.
• The element does not require authentication.
8. If you typed a password in the previous step, retype the password in the Verify Password field.
9. In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(from the HP SIM home page, click Tools > Storage Essentials > Home > Discovery >
Setup
).
10. Do not select the Do Not Authenticate option.
11. Click OK.
12. To start discovering elements on the network, click the Start Discovery button on the IP
Addresses
tab.
Maximum Port Speed Always Shows 2 Gb/s
Max Port Speed for Brocade switches discovered through the Brocade API always shows 2Gb/s in
the management server's Property pages.
Brocade Firmware 2.6.x is Not Supported
Brocade switches with firmware 2.6.x do not refresh their zoning caches correctly. There are
replication errors when the management server does zoning operations on switches with this
firmware, and you may not get complete information from the switches. Brocade firmware 2.6.x is
not supported with this release of the management server for this reason.
Discovering CNT Switches
The management server uses the CNT SMI-S provider to discover CNT switches. A provider is a
small software program that is used by the management server to communicate with a device, such
as a switch.