HP Storage Essentials NAS Manager Software - Manual (Page 239)

Storage Essentials 5.1 User Guide 207
Performing a Test File System Viewer Scan
If you have changed your network configuration and you are not sure the management server can
still scan the server running File System Viewer, you can perform a test File System Viewer scan.
During this scan, the management server verifies that it can access the server and perform a high
level File System Viewer scan. It also verifies whether or not it can scan network volumes with host
discovery credentials.
Keep in mind the following:
• This feature only works with CIM Extensions builds 5.1 and later.
• If you want to scan network mounted drives on a host running Windows, you must make sure a
user is logged onto the Windows host. The user must have permission to mount the network
drives.
To perform a test File System Viewer scan:
1. Click Reports > Storage Essentials > Data Collection > File System Viewer Data in HP
Systems Insight Manager.
2. Click the Test button in the Test Scan column for the corresponding file server.
After you click the Test button, the management server attempts to access the server and
perform a test File System Viewer scan.
Managing Backup Collection
To learn more about managing the collection of protection data, see the following topics:
• ” Viewing Collectors for Backup Servers ” on page 208
• ” Scheduling Backup Collection for Backup Managers ” on page 208
• ” Editing the Schedule of Backup Collection ” on page 209
• ” Viewing the Status of Backup Collection ” on page 209
Scan Status The following scan statuses are possible:
• No Data
• Scan in Progress
• Scan Done
• Scan Failed
• Transferring Data
• Transfer Completed
• Uploading Data
• Upload Completed
• Error
Table 22 About File System Viewer Scan Status (continued)
Column Heading Description