HP Storage Essentials NAS Manager Software - Manual (Page 418)

Provisioning Manager 386
to configure the operating system, so that it becomes aware of the device. Refer to the
documentation that accompanies the operating system for the host.
Provisioning Issues by Vendor
This section describes the following:
• ” Issues Specific to CLARiiON Storage Systems ” on page 386
• ” Issues Specific to EMC Symmetrix Storage Systems ” on page 387
• ” Issues Specific to HDS Storage Systems ” on page 388
• ” Issues Specific to HP Storage Systems ” on page 391
• ” Issues Specific to Engenio Storage Systems ” on page 392
Issues Specific to CLARiiON Storage Systems
The following issues are specific to CLARiiON® storage systems:
• ” Make the Management Server a Privileged User for CLARiiON ” on page 386
• ” EMC Navisphere CLI Is Required ” on page 386
Make the Management Server a Privileged User
for CLARiiON
Before you can provision a CLARiiON storage system, you must configure it to recognize the
management server as a privileged user. This task can be completed by using NaviCli as follows:
C:\>navicli -h 192.168.1.249 remoteconfig -setconfig -o -adduser
SYSTEM@hostname
• where
• 192.168.1.249 is the URL of the CLARiiON storage system
• SYSTEM@hostname is the name of the computer running the management server
• This example tells the CLARiiON storage system at 192.168.1.249 to accept configuration
change requests from management server running on the computer named hostname.
EMC Navisphere CLI Is Required
The EMC Navisphere® CLI is required for the management server to communicate with the
CLARiiON® storage system. At the time this documentation was created, EMC distributed the
Navisphere CLI as part of the EMC Navisphere Software Suite. Contact your EMC representative for
more information about obtaining the Navisphere CLI. Distribution rights for the Navisphere CLI
belong to EMC. EMC Navisphere CLI Is Required
In Navisphere Manager add one of the following to the privilege user section:
Management server on UNIX systems:
SYSTEM@root
SYSTEM@root
where
• name_of_my_management_server is the DNS name of the computer running the
management server software