HP Storage Essentials NAS Manager Software - Manual (Page 308)

Viewing Element Topology and Properties 276
1 When McDATA and Connectrix switches are discovered through a proxy by SNMP, you cannot
view or perform any provisioning operations for those switches.
2
Only these options are accessible when McDATA and Connectrix switches are discovered by a
switch IP address directly through SNMP. This setting provides view only access to the active zone
set and its members. You cannot create, modify, and/or delete zone sets or its members.
3
The delete zone set option is disabled for active zone sets.
Viewing Storage Elements
System Manager has a wide range of features to help you in viewing your storage elements in the
topology. For example, you can filter fabrics, arrange elements in the topology, and search for
elements in the topology. You can even view the status of elements in the topology and find the
impact of removing an element.
See the following topics in this section for more information.
• ” Adding a Virtual Application ” on page 277
• ” Adding Information for “Discovered” Hosts ” on page 278
• ” Arranging Elements in the Topology ” on page 279
• ” Closing Topology Windows ” on page 281
1 Create a zone alias A zone alias with a blue folder under the fabric node.
1 Delete a zone alias A zone alias under the Zone Aliases node.
1 Modify a zone alias
1 Show zone alias
details
Provision Storage Pool A storage system under the Storage System LUN Access
node.
Provision Volume
Provision Host Security
Groups
Table 36 Drop-Down Menu Options on the Access Tab (continued)
Task To Perform Task, Right-Click...