HP Storage Essentials NAS Manager Software - Manual (Page 348)

Viewing Element Topology and Properties 316
Accessing the Navigation Tab
To access the Navigation tab:
1. Access the management server.
2. To access the Navigation tab, do one of the following:
• Click an element in Application Viewer.
• Double-click an element in Capacity Manager, Performance Manager or System Manager.
• Click one of the following elements in Backup Manager and then click Navigation in the
lower-right corner.
• Backup Client
• Backup Library
• Host
• Master backup server
• Master backup media
3. Click the Navigation tab. Not necessary if you accessed the Navigation tab from Backup
Manager.
Viewing Element Properties
This section describes the following:
• ” About the Properties Tab ” on page 316
• ” Accessing the Properties Tab ” on page 317
• ” Viewing Fabric Properties ” on page 317
• ” Assigning a Custom Name ” on page 318
About the Properties Tab
The Properties tab provides detailed information about an element. Since the information obtained
from each type of element varies, the Properties tab displays information only relevant for that type
of element. For example, the Properties tab for fabrics lists the zones, zone sets, switches, and zone
aliases, as compared to the Properties tab for a host, which lists the processors, cards, applications,
and storage volumes the host uses.
See ”
Viewing Fabric Properties ” on page 317 for more information about the Properties tab for
fabrics.
The Properties tab usually provides the following, although this list does vary from element to
element:
• *Assign a Custom Name - To make it easier to identify the element, assign the element a
Custom Name. See the topic, ” Assigning a Custom Name ” on page 318. This option is not
available to all elements.
• *IP Address (Generic Hosts Only) - Type an IP address for a generic host.
• *DNS Name (Generic Hosts Only) - Type a DNS name for a generic host.
• *Version (Generic Hosts Only) - Type a version number for the generic host.