HP Storage Essentials NAS Manager Software - Manual (Page 262)

Configuring the Management Server 230
Stopping Performance Collectors
When you stop a collector, the management server stops gathering information for which the
collector is responsible. For example, if a performance collector is not running, its corresponding
statistics are no longer receiving information to display. One of the following occurs:
• If there was originally no information gathered for the statistic, no data appears for that statistic.
• If information was previously gathered for the statistic, old data appears for that statistic.
To stop a collector:
1. Access the page for performance collectors (Optimize > Storage Essentials > Performance
Data Collection
).
2. Click the Stop button corresponding to the collector you want to stop.
The collector stops gathering information for its corresponding reports.
To stop more than one collector at once, select more than one collector and then click the Stop
Collectors
button.
Setting the Date and Time for Performance Collectors
To set the date and time, do the following:
1. Click Optimize > Storage Essentials > Performance Data Collection.
2. Click the Edit button, .
3. Click the calendar icon, .
4. Enter the time in the time field. Make sure the time resembles a 24-hour clock, for example
22:00 for 10 p.m.
5. Click the date.
The date is highlighted in pink.
You can navigate the calendar as follows:
- Displays the same month in the previous year
- Displays the previous month
- Displays the next month
- Displays the same month in the following year
6. When you are done, click the Set button.
The management server displays the date and time.