HP Storage Essentials NAS Manager Software - Manual (Page 641)

Storage Essentials 5.1 User Guide 609
• Warning - An example of a warning is one or more new physical fabric objects (device
port, switch, or fabric) have appeared.
• Minor - An example of a minor event is a physical fabric object (switch port or fabric) has
changed state.
• Major - An example of a major event is one or more physical fabric objects (device port,
switch, or fabric) have disappeared.
• Critical - An example of a critical event is Brocade switches that have a failed firmware
download and the failure reason code for each respective switch.
After you select an event level, click OK.
• Execute a Custom Command - Policy Manager executes a custom command on the
management server when the condition is fulfilled. Type a command that will execute the
script in the field. Then, click OK. The software assumes you are in the
%JBOSS4_DIST%\server\appiq\remotescripts directory on the management
server when the script is executed. You can use environment variables in your script, such as
POLICY_NAME and POLICY_DESCRIPTION. POLICY_NAME. POLICY_NAME provides
the policy name and POLICY_DESCRIPTION provides the policy description. See
” Software Environment Variables for Scripting ” on page 304 for more information.
Prefix the command with “start” if the custom command triggers a user interface component,
such as a program that uses the user interface (Example: Microsoft Internet Explorer) or a
command prompt window.
For example, assume you want the custom command to open a command prompt window
and list the contents in the directory. You would prefix the command with start as shown
below:
start dir
13. Click OK.
Viewing Policies
To view policies, access Policy Manager as described in the topic, ” Accessing Policy Manager ” on
page 592.
In the right pane, the policies are listed in a table.
Table 137 Policy Table Description
Heading Description
Name The name of the policy.
Description A description of the policy.
Active If there is a check mark in this column, the policy is active.
Edit
Click the button to edit a policy, for example to
change its Active status.