HP Storage Essentials NAS Manager Software - Manual (Page 206)

Managing Security 174
NOTE: If you want to go back and forth between internal and external (AD/LDAP)
authentication, rename the login-handler.xml file before you modify it. This way you
can easily switch back to internal authentication by changing the file name back to
login-handler.xml.
b. In the login-handler.xml file, change the value of the tag to
the name of a user account in LDAP, as shown in the following example:
Administrator
where Administrator is the name of a user account in LDAP.
2. In the login-handler.xml file, comment out the section that contains
com.appiq.security.server.BasicLoginhandler, which enables internal
authentication mode. Only one login handler is allowed at a time.
3. Comment out the
Default
tag as follows:
4. Uncomment the line containing the class name and login handler type so that it appears as
follows:
com.appiq.security.server.LdapLoginHandler
HandlerClass>
LDAP
5. Replace directory.hp.com with the IP address or the fully qualified name of your LDAP
server in the login-handler.xml file, as shown in the following example:
192.168.10.1
where
•
192.168.10.1
is the IP address of the server running LDAP.
• 389 is the port on which LDAP is running on the server.
6. If you want the password to be saved in the management server database, change the value of
the tags to true, as shown in the following example:
true
Saving the passwords in the management server database lets a user still log into the
management server if the management server is changed back to local mode. This, however, is
not recommended as it defeats the purpose of externalizing a user's credentials.
The login-handler.xml file contains two sets of tags: one for Active
Directory and one for LDAP. Make sure you change the value of the tags
that are children of the tags.
7. If you want the user name to be case sensitive, change the value of the
tag to true, as shown in the following example:
true
If you change the value of to true, the management server
becomes case-sensitive to user names. The management server sees MyUserName and
myusername as different users.