IAI America REXT - Manual (Page 315)

Part 2 Startup Chapter
Chapter 5 Network Setup
289
Part 2 Startup Chapter
Caution
If one of the following warning messages appears, the parameters contain one or more invalid settings. Correct the
applicable setting or settings, and then transfer the parameters again.
x If not all items have been selected in the editing of operation mode for each axis, the following warning
message will appear and the transfer will stop.
x In a CC-Link system, a warning message will appear if the following condition is not satisfied and the transfer
will stop.
Selected station number + Number of occupied stations determined by the final number of selected axes –
1 (station number of the selected station) d 64
Caution
If parameters are transferred while the Gateway R unit is operating in the AUTO mode, the following warning message will
appear. Change the operation mode to MANU and then transfer the parameters again.
If OK is clicked four times or more in the AUTO mode despite the warning, transfer will be forcibly terminated.
-315-