NEC PD78214 - Manual (Page 8)

Never use the code combinations indicated "Not to be set" in the register descriptions.
Characters likely to be confused: 0 (zero) and O (uppercase "O")
1 (one), l (lowercase "L"), and I (uppercase "I")
Related documents:
The following reference documents are also available.
• Documents related to the
µPD78214 sub-series
• Serial Bus Interface (SBI) User’s Manual (IEM-1303)
Product
Document
µPD78212
µPD78213
µPD78214
Data Sheet
User's Manual Hardware
Instruction
Application Note Basic
Application
Floating-Point Arithme-
tic Operation Programs
µPD78212(A)
µPD78213(A)
µPD78214(A) µPD78P214(A)
This manual
IEU-1311
IEA-1220
IEA-1282
IEA-1273
IC-2526 IC-2831 IC-3095
B
7
1
6
0
5
×
4
A
3
1
2
0
1
×
0
EDC
Write operation Read operation
The encircled bit number indicates that the bit name
is used as reserved word by the NEC assembler and
defined by the header file, sfrbit.h, by C compiler.
Either 0 or 1 can be
written to this bit without
affecting the register
operation.
0 or 1 is read from these
bits.
Write 0 to this bit.
Write 1 to this bit.
Write a value according to
the necessary function. A value is read according
to the operation.
Register name
Register representation