NEC PD78214 - Manual (Page 466)

437
Appendix B Development Tools
B
This program provides the serial and parallel interfaces between PG-1500 and the
host machine, enabling the host machine to control the PG-1500.
PG-1500 controller
OS
µS5A10PG1500
µS5A13PG1500
µS7B11PG1500
µS7B10PG1500
µS5A13PG1500
Part number
5-inch 2HD
3.5-inch 2HD
5-inch 2D Note 2
5-inch 2HC
3.5-inch 2HC
Distribution medium Host machine
See Section B.2.4.
MS-DOS (Ver.3.10 to
Ver.5.00A Note 1 )
PC-9800 series
B.2.3 Software for the PROM Programmer
IBM PC/AT or
compatible
Notes 1. Versions 5.00 and 5.00A feature a task swap function. However, the task swap function cannot be used with this
software.
2. The 5.25-inch 2D model is no longer available. Those users who have already purchased a 5.25-inch 2D model
will be supplied with a 5.25-inch 2HC model when the product is next upgraded.
B.2.4 OS for the IBM PC
The following OSs are supported for the IBM PC:
PC DOS
Windows Note 1
MS-DOS
IBM DOS
OS
Ver.3.1 to Ver.6.1
Ver.3.1
Ver.5.0 to Ver.6.0
5.0/V Note 2
J5.02/V Note 2
Version
Notes 1. PC DOS and Windows are used together for the fuzzy knowledge-data creation tool.
2. Only English-version systems are supported.
Caution Versions 5.00 and later feature a task swap function. However, the task swap function cannot be used with this
software.
★
★