NEC PD78214 - Manual (Page 465)

436
µ
PD78214 Sub-Series
This program enables control of the in-circuit emulator for the 78K/II series from the
host machine. It can automatically execute commands, thus enhancing efficiency in
debugging. The following programs are available, depending on the type of in-circuit
emulator:
In-circuit emulator
control program
Software for the In-Circuit Emulator (2/2)
IE78210
IE78240
( ) Note 1
µ S5A1IE78210-P01
µ S5A10IE78210-P01
µ S5A13IE78210
µ S7B11IE78210-P02
µ S7B10IE78210
µ S7B13IE78210
µ S5A11IE78240
µ S5A10IE78240
µ S5A13IE78240
µ S7B11IE78240
µ S7B10IE78240
µ S7B13IE78240
Part number
8-inch 2D Note 3
5.25-inch 2HD
3.5-inch 2HD
5.25-inch 2D Note 4
5.25-inch 2HC
3.5-inch 2HC
8-inch 2D Note 3
5.25-inch 2HD
3.5-inch 2HD
5.25-inch 2D Note 4
5.25-inch 2HC
3.5-inch 2HC
Distribution medium OS
MS-DOS
See Section
B.2.4.
MS-DOS
See Section
B.2.4.
Host machine Emulator
IE-78210-R
IE-78210-R-EM
IE-78240-R
IE-78240-R-EM
PC-9800 series (Ver.3.10
to Ver5.00A Note 2 )
PC-9800 series (Ver.3.10
to Ver5.00A Note 2 )
IBM PC/AT or
compatible
IBM PC/AT or
compatible
Notes 1. When using the IE-78210-R or IE-78210-R-EM, the IE-78210 is also necessary. For the IE-78240-R or IE-78240-R-
EM, the IE-78240 is necessary. When using the IE-78210-R together with the IE-78240-R-EM, the IE-78210 is
necessary.
2. Versions 5.00 and 5.00A feature a task swap function. However, the task swap function cannot be used with this
software.
3. The 8-inch 2D model has been superseded by the 5.25-inch 2HD and 3.5-inch 2HD models. Those users who
have already purchased an 8-inch 2D model will be supplied with a 5.25-inch 2HD model when the product is
next upgraded.
4. The 5.25-inch 2D model is no longer available. Those users who have already purchased a 5.25-inch 2D model
will be supplied with a 5.25-inch 2HC model when the product is next upgraded.
★