Hardware (2/2) – NEC PD78214 User Manual
Page 461
432
µ
PD78214 Sub-Series
HARDWARE (2/2)
This socket is mounted on the board of the user system developed for the 74-
pin QFP. It is used together with the EP-78210GJ or EP-78240GJ-R.
This socket is mounted on the board of the user system developed for the 64-
pin QFP. It is used together with the EP-78210GC or EP-78240GC-R.
This PROM programmer, when connected to an accessory board and the
optional programmer adapter, enables programming of the PROM built into a
single-chip microcomputer, either in its stand-alone mode or under the control
of the host machine. PROMs having typical capacities, from 256K to 4M bits,
can be programmed.
This PROM programmer adapter is used with the
µPD78P214CW and
µPD78P214DW. It is used together with a PROM programmer such as the PG-
1500.
This PROM programmer adapter is used with the
µPD78P214GC-AB8. It is used
together with a PROM programmer such as the PG-1500.
This PROM programmer adapter is used with the
µPD78P214GJ-5BJ. It is used
together with a PROM programmer such as the PG-1500.
This PROM programmer adapter is used with the
µPD78P214GQ-36. It is used
together with a PROM programmer such as the PG-1500.
This PROM programmer adapter is for the
µPD78P214L. It is used together
with a PROM programmer such as the PG-1500.
★
EV-9200G-74
EV-9200GC-64
PG-1500
PA-78P214CW
PA-78P214GC
PA-78P214GJ
PA-78P214GQ
PA-78P214L
Remarks 1. The EP-78210GC, EP-78210GJ, EP-78240GC-R, and EP-78240GJ-R are provided with one EV-9200G-74 or
EV-9200GC-64.
2. The EV-9200G-74 and EV-9200GC-64 are supplied in batches of five.