Dell PowerEdge FX2/FX2s - Manual (Page 63)

Defaults Summary
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
show environment
View system component status (for example, temperature or voltage).
Syntax show environment [all | stack-unit unit-id]
Parameters
all Enter the keyword all to view all components.
stack-unit unit-
id Enter the keywords stack-unit then the unit-id to display
information on a specific stack member. The range is from 0
to 5.
thermal sensor Enter the keywords thermal-sensor to view all
components.
Command
Modes
• EXEC
• EXEC Privildge
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example (all)
Dell#show environment all
-- Unit Environment Status --
Unit Status Temp Voltage TempStatus
---------------------------------------------------------------
------------
* 0 online 59C ok 2
* Management Unit
-- Thermal Sensor Readings (deg C) --
Unit Sensor0 Sensor1 Sensor2
-------------------------------
0 55 45 58
Dell#
Example
(stack-unit)
Dell#show environment stack-unit
-- Unit Environment Status --
Unit Status Temp Voltage TempStatus
---------------------------------------------------------------
------------
* 0 online 59C ok 2
63