Dell PowerEdge FX2/FX2s - Manual (Page 73)

TenGigabitEthernet 0/5 YES up up
TenGigabitEthernet 0/6 NO up down
TenGigabitEthernet 0/7 YES up up
TenGigabitEthernet 0/8 NO up down
----------------------------------- show lacp
---------------------------
Interface OK Status Protocol Description
Port-channel 1 YES up up
Dell#
Example (detail
Command)
Dell#show server-interfaces detail
---------------- show server ports detail
---------------------
TenGigabitEthernet 0/1 is up, line protocol is up
Hardware is DellEth, address is 00:1e:c9:de:03:79
Current address is 00:1e:c9:de:03:79
Server Port AdminState is N/A
Pluggable media not present
Interface index is 33886978
Internet address is not set
Mode of IPv4 Address Assignment : NONE
DHCP Client-ID :001ec9de0379
MTU 12000 bytes, IP MTU 11982 bytes
LineSpeed 10000 Mbit
Flowcontrol rx off tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 2d16h24m
Queueing strategy: fifo
Input Statistics:
10701 packets, 1123557 bytes
0 64-byte pkts, 10701 over 64-byte pkts, 0 over 127-byte
pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
byte pkts
10701 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
442113 packets, 46047526 bytes, 0 underruns
870 64-byte pkts, 362829 over 64-byte pkts, 55411 over
127-byte pkts
--More--
show system
Displays the current status of all stack members or a specific stack member.
Syntax show system [brief | stack-unit unit-id]
Parameters
brief (OPTIONAL) Enter the keywordbrief to view an abbreviated
list of system information.
73