Dell PowerEdge FX2/FX2s - Manual (Page 242)

summary (OPTIONAL) Enter the keyword summary to view a table
showing the number of messages per type and per slot.
driverlog (OPTIONAL) Enter the keyworddriverlog to view the
driverlog information per stack-unit.
Enter the keyword stack-unit followed by the stack member
ID of the switch for which you want to display the driver log.
The range is from 0 to 1.
kernellog (OPTIONAL) Enter the keyword kernellogto view the
kernellog information per stack-unit.
Enter the keyword stack-unit followed by the stack member
ID of the switch for which you want to display the driver log.
The range is from 0 to 1.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
(Partial)
Dell#show logging
Syslog logging: enabled
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 168 Messages Logged, Size
(40960
bytes)
Trap logging: level informational
Logging to 172.16.1.162
Logging to 10.10.10.4
Logging to 10.1.2.4
Logging to 172.31.1.4
Logging to 133.33.33.4
Aug 1 15:05:53: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured
from console
Jul 31 20:25:40: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured
from
console
Jul 31 20:14:03: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured
from
console
Jul 31 20:03:58: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured
from
console
Jul 31 18:22:10: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured
from
console
Jul 31 15:50:30: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured
from
console
Jul 31 14:26:22: %STKUNIT1-M:CP %SYS-5-CONFIG_I: Configured
from
console
Jul 31 14:26:17: %STKUNIT1-M:CP %SEC-3-
AUTHENTICATION_ENABLE_SUCCESS:
242