Http copy via cli, Copy http, 10 http copy via cli – Dell PowerEdge FX2/FX2s User Manual

Page 128

Text mode
Original mode

HTTP Copy via CLI

This chapter describes the HTTP Copy via CLI command in the Dell Networking OS.

copy http

Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP,

and SCP (in the hostip field).

Syntax

copy http://10.16.206.77/sample_file flash://sample_filecopy
flash://sample_file http://10.16.206.77/sample_file
You can copy from the server to the switch and vice-versa.

Parameters

copy http:
flash:

Address or name of remote host [10.16.206.77]:

Port number of the server [80]:

Source file name [sample_file]:

User name to login remote host: x

Password to login remote host:

Destination file name [sample_file]:

Defaults

None.

Command
Modes

EXEC

Command
History

Version 9.5(0.0)

Supported on the FN I/O aggregator.

Example

copy http://admin:[email protected]/sample_file flash://

sample_file

Related
Commands

copy ftp:flash
Copy files from FTP server to switch

128