Dell PowerEdge FX2/FX2s - Manual (Page 187)

16
Link Aggregation Control Protocol (LACP)
This chapter contains commands for Dell Networking’s implementation of the link aggregation control
protocol (LACP) for the creation of dynamic link aggregation groups (LAGs — called port-channels in Dell
Networking OS parlance).
auto-lag enable
Enable auto-lag on a server facing port.
Syntax auto-lag enable
To disable the auto-lag use the no auto-lag enable command.
When disabled, the server port associated in a LAG is removed and the LAG itself
gets removed. Any LACPDUs received on the server port are discarded.
Defaults Enabled
Command
Modes INTERFACE
Command
History
Version 9.6(0.0) Supported on the FN I/O Aggregator
Version 9.6
(0.0) Supported on the M I/O Aggregator.
Usage
information This command is supported in Standalone, Stacking, and VLT modes.
clear lacp counters
Clear Port Channel counters.
Syntax clear lacp port-channel-number counters
Parameters
port-channel-
number
Enter a port-channel number:
The range is from 1 to 128.
187