Dell PowerEdge FX2/FX2s - Manual (Page 65)

iSCSI
LLDP
SNMP
Dell#
Example
(media)
Dell#show inventory media ?
<0-5> Slot
number
| Pipe through a
command
Dell#show inventory media
Slot Port Type Media Serial
Number F10Qualified
---------------------------------------------------------------
---------------
0 9 SFP+ 10GBASE-SR
AHJ0BU3 Yes
0 10 SFP+ 10GBASE-CU5M
APF125100446U1 Yes
0 11 SFP+ 10GBASE-SR
CD23FM12H Yes
0 12 SFP+ 10GBASE-SR
CD23FM0XT Yes
Dell#
Related
Commands
show config (from INTERFACE VLAN mode) — displays information on a specific
physical interface or virtual interface.
show memory
Display current memory usage on the I/O Aggregator.
Syntax show memory [stack-unit 0–5]
Parameters
stack-unit 0–5 (OPTIONAL) Enter the keywords stack-unit then the stack
unit ID of the stack member to display memory information
on the designated stack member.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information The output for show memory command displays the memory usage of LP part
(sysdlp) of the system. The sysdlp is an aggregate task that handles all the tasks
running on the CPU.
Example
Dell#show memory
Statistics On Unit 0 Processor
65