Dell PowerEdge FX2/FX2s - Manual (Page 427)

tacacs-server key
Configure a key for communication between a TACACS+ server and a client.
Syntax tacacs-server key [encryption-type] key
To delete a key, use the no tacacs-server key key command.
Parameters
encryption-
type (OPTIONAL) Enter either zero (0) or 7 as the encryption type
for the key entered. The options are:
• 0 is the default and means the key is not encrypted and
stored as clear text.
• 7 means that the key is encrypted and hidden.
key Enter a text string, up to 42 characters long, as the clear text
password. Leading spaces are ignored.
Defaults Not configured.
Command
Modes CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information The key configured with this command must match the key configured on the
TACACS+ daemon.
timeout login response
Specify how long the software waits for the login input (for example, the user name and password) before
timing out.
Syntax timeout login response seconds
To return to the default values, use the no timeout login response
command.
Parameters
seconds
Enter a number of seconds the software waits before logging
you out. The range is:
• VTY: the range is from 1 to 30 seconds, the default is 30
seconds.
• Console: the range is from 1 to 300 seconds, the default
is 0 seconds (no timeout).
• AUX: the range is from 1 to 300 seconds, the default is 0
seconds (no timeout).
Defaults See the defaults settings shown in Parameters.
427