Dell PowerEdge FX2/FX2s - Manual (Page 48)

5
Control and Monitoring
This chapter describes control and monitoring for the I/O Aggregator.
asset-tag
Assign and store a unique asset-tag to the stack member.
Syntax asset-tag stack-unit unit id Asset-tag ID
To remove the asset tag, use the no stack-unit unit-id Asset-tag ID
command.
Parameters
stack-unit unit-
id Enter the keywords stack-unit then the unit-id to
assign a tag to the specific member. The range is from 0 to
5.
Asset-tag ID Enter a unique asset-tag ID to assign to the stack member.
This option accepts a maximum of 10 characters, including
all special characters except double quotes. To include a
space in the asset-tag, enter a space within double quotes.
Defaults No asset-tag is assigned.
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Related
Commands show system — Displays the current status of all stack members or a specific
member.
clear alarms
Clear the alarms on the system.
Syntax clear alarms
Command
Modes EXEC Privilege
48