Dell PowerEdge FX2/FX2s - Manual (Page 327)

Usage
Information You must include the colon (:) when entering this command.
CAUTION: This command deletes all files, including the startup
configuration file. So, after executing this command, consider saving the
running config as the startup config (use the write memory command or
copy run start command).
Related
Commands
copy – copies the current configuration to either the startup-configuration file or
the terminal.
show file – displays the contents of a text file in the local filesystem.
show file-systems – displays information about the file systems on the system.
[no] logging coredump stack-unit
Enable the coredump.
Syntax [no] logging coredump stack-unit all
Command
Modes CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information The Kernel core dump can be large and may take up to five to 30 minutes to
upload. The Dell Networking OS does not overwrite application core dumps so
delete them as necessary to conserve space on the flash; if the flash out of
memory, the coredump is aborted. The Dell Networking OS completes the
coredump process and waits until the upload is complete before rebooting the
system.
pwd
Display the current working directory.
Syntax pwd
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#pwd
flash:
Dell#
Related
Commands cd – changes the directory.
327