Dell PowerEdge FX2/FX2s - Manual (Page 156)

Field Description
• In Layer 3 port channels, the primary port is not
indicated.
Example
Dell#show int po 1 brief
Codes: L - LACP Port-channel
LAG Mode Status Uptime Ports
1 L2 down 00:00:00 Te 0/7 (Down)
Dell#
Related
Commands
show lacp — displays the LACP matrix.
show interfaces stack-unit
Display information on all interfaces on a specific I/O Aggregator stack member.
Syntax show interfaces stack-unit unit-number
Parameters
unit-number Enter the stack member number (0 to 5).
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#show interfaces stack-unit 0
TenGigabitEthernet 0/1 is down, line protocol is down
Hardware is DellForce10Eth, address is 00:1e:c9:f1:00:05
Current address is 00:1e:c9:f1:00:05
Server Port AdminState is Down
Pluggable media not present
Interface index is 34148609
Internet address is not set
Mode of IP Address Assignment : NONE
DHCP Client-ID :tenG130001ec9f10005
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
Flowcontrol rx off tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 5d5h24m
Queueing strategy: fifo
Input Statistics:
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte
pkts
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
156