Dell PowerEdge FX2/FX2s - Manual (Page 277)

show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of
the designated stack member.
Syntax show hardware stack-unit 0 {buffer {total-buffer | unit 0-0
{port 42-53 {buffer-info | queue {0-12 buffer-info | all
buffer-info} } | total buffer}} {cpu {data-plane statistics |
management statistics | private-mgmt statistics} | drops [unit
0-0 [port {42-53 | range}] | user-port { 1-12 | range }] | fpga
registers | fru dump | stack-port 9-12 | unit 0-0 {counters |
details | ipmc-replication | port-stats [detail] | register |
table-dump WORD}}
Parameters
stack-unit 0
{command-
option} Enter the keywords stack-unit then 0 to select the stack
member and then enter one of the following command
options to display a collection of data based on the option
entered.
buffer Enter the keyword buffer. To display the total buffer
statistics for the stack unit, enter the keywords total-
buffer. To display the forwarding plane statistics containing
the packet buffer usage per port per stack unit, enter the
keyword unit then 0 for port-pipe 0, then port and the
port number (42-53, and then buffer-info. To display the
forwarding plane statistics containing the packet buffer
statistics per COS per port, enter the keyword unit then 0
for port-pipe 0, then port and the port number (42-53, and
then queue 0-12 buffer-info or all buffer-info.
cpu {data-
plane statistics |
management
statistics |
private-mgmt
statistics} Enter the keyword cpu then one of the keywords to display
the CPU statistics: data-plane statistics, management
statistics, or private-mgmt statistics.
drops [unit 0-0
[port {42-53 |
range}] Enter the keyword drops to display internal drops on the
selected stack member. Optionally, use the keyword unit
with 0 to select port-pipe 0, and then use port 42-53 or
range to select a port or range on that port-pipe.
user-port { 1-12
| range }] Enter the keyword user-port then 1-12 or range to
display the statistics on a specified line-card port or range of
ports.
fpga registers Enter the keywords fpga registers to display fpga details.
fru dump Enter the keywords fru dump to display fru details.
stack-port 9-12 Enter the keywords stack-port and a stacking port number
to select a stacking port for which to display statistics.
Identify the stack port number as you would to identify a 10G
port that was in the same place in one of the rear modules.
277