Show bootvar, Show default gateway – Dell PowerEdge FX2/FX2s User Manual
Page 92

Dell Force10 Networks System Boot
Official IOM_XLOAD_LP_IMG_BOOT_SELECTOR, BSP Release
4.0.0.0bt1
Created Tue May 1 10:56:34 2012 by build on login-sjc-01
BOOT_USER #
show bootvar
Show the summary of operating system boot parameters.
Syntax
show bootvar
Command
Modes
• uBoot
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
Example
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : tftp
file name : stomp-ben
Management Etherenet IP address : 10.16.150.160/16
Server IP address : 10.16.127.35
No Default Gateway IP address specified!
Management Etherenet MAC address : 00:1E:C9:DE:03:79
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : flash
file name : systema (system://A
Partition)
DEFAULT OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : tftp
file name : FTOS-FN-1-0-0-1344.bin
Management Etherenet IP address : 10.16.150.160/16
Server IP address : 10.16.127.35
No Default Gateway IP address specified!
Management Etherenet MAC address : 00:1E:C9:DE:03:79
BOOT_USER #
show default gateway
Displays the default gateway IP address.
Syntax
show default-gateway
92