Dell PowerEdge FX2/FX2s - Manual (Page 31)

4
File Management
This chapter contains commands needed to manage the configuration files and includes other file
management commands.
The commands in this chapter are supported by the Dell Networking OS.
boot system gateway
Specify the IP address of the default next-hop gateway for the management subnet.
Syntax boot system gateway ip-address
Parameters
ip-address Enter an IP address in dotted decimal format.
Command
Modes CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information
Saving the address to the startup configuration file preserves the address in NVRAM
in case the startup configuration file is deleted.
boot system stack-unit
Specify the location of the Dell Networking OS image to be used to boot the system.
Syntax boot system stack-unit <0-5 | all> {default | primary |
secondary}
Parameters
0-5 Enter the stack member unit identifier of the stack member.
all Enter the keyword all to set the primary, secondary, and
default images for the system.
default Enter the keyword default to set the default image path for
the system.
31