Dell PowerEdge FX2/FX2s - Manual (Page 147)

Example
Dell(conf)#interface range tengigabitethernet 0/1 - 2
Dell(conf-if-range-te-0/1-2)#show config
!
interface TenGigabitEthernet 0/1
no ip address
switchport
no shutdown
!
interface TenGigabitEthernet 0/2
no ip address
switchport
no shutdown
Dell(conf-if-range-te-0/1-2)#
show config (from INTERFACE VLAN mode)
Displays the current configuration of the Default VLAN.
Syntax show config
Command
Modes INTERFACE VLAN
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell(conf-if-vl-1)#show config
!
interface Vlan 1
description a
no ip address
mtu 2500
shutdown
Dell(conf-if-vl-1)#
show config (from PROTOCOL LLDP mode)
Displays the LLDP configuration.
Syntax show config
Command
Modes PROTOCOL LLDP
Example
Dell(conf-lldp)#show conf
!
protocol lldp
Dell(conf-lldp)#
147