Renew dhcp interface – Dell PowerEdge FX2/FX2s User Manual

Page 115

Parameters

interface type
slot/port

• For the management interface on the stack-unit, enter

the keyword management ethernet followed by slot/port

information. The slot and port range is 0.

• For a VLAN, enter the keyword vlan followed by a number

from 1 to 4094.

Command
Modes

EXEC Privilege

Default

None

Command
History

Version 9.4(0.0)

Supported on the FN I/O aggregator.

Usage
Information

When you enter the release dhcp command, although the IP address that was
dynamically-acquired from a DHCP server is released from an interface, the ability
to acquire a new DHCP server-assigned address remains in the running
configuration for the interface. To acquire a new IP address, enter either the renew
dhcp command at the EXEC privilege level or the ip address dhcp command at
the interface configuration level.

renew dhcp interface

Re-acquire a dynamic IP address on an Ethernet interface enabled as a DHCP client.

Syntax

renew dhcp interface type slot/port}

Parameters

interface type
slot/port

Enter any of the following keywords and slot/port or number
to clear counters from a specified interface:

• For the management interface on the stack-unit, enter

the keyword managementethernet followed by slot/
port information. The slot and port range is 0.