Dell PowerEdge FX2/FX2s - Manual (Page 229)

start-stop Enter the keywords start-stop to send a “start accounting”
notice at the beginning of the requested event and a “stop
accounting” notice at the end of the event.
wait-start Enter the keywords wait-start to ensure that the TACACS+
security server acknowledges the start notice before granting
the user’s process request.
stop-only Enter the keywords stop-only to instruct the TACACS+
security server to send a “stop record accounting” notice at
the end of the requested user process.
tacacs+ Enter the keyword tacacs+ to use TACACS+ data for
accounting.
Dell Networking OS currently only supports TACACS+ accounting.
Defaults None
Command
Modes CONFIGURATION
Usage
Information In the example above, TACACS+ accounting is used to track all usage of EXEC
command and commands on privilege level 15. Privilege level 15 is the default. If
you want to track usage at privilege level 1 for example, use theaaa accounting
command 1 command.
Command
History
Version 9.5(0.0) Supported on the FN I/O aggregator.
Example
Dell(config)# aaa accounting exec default start-stop tacacs+
Dell(config)# aaa accounting command 15 default start-stop
tacacs+
Dell(config)#
Related
Commands
enable
password changes the password for the enable command.
login
authentication enables AAA login authentication on the terminal lines.
password creates a password.
tacacs-server
host specifies a TACACS+ server host.
timeout login response
Specify how long the software waits for the login input (for example, the user name and password) before
timing out.
Syntax timeout login response seconds
To return to the default values, use the no timeout login response
command.
229