Dell PowerEdge FX2/FX2s - Manual (Page 188)

Command
Modes EXEC
EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Related
Commands show lacp — displays the LACP configuration.
debug lacp
Debug LACP (events).
Syntax debug lacp [pdu interface [in | out]]
To disable LACP debugging, use the no debug lacp [pdu interface [in |
out]] command.
Parameters
pdu in | out (OPTIONAL) Enter the keyword pdu to debug the LACP
Protocol Data Unit information. Optionally, enter an in or
out parameter to:
• Receive enter in
• Transmit enter out
interface in |
out Enter the following keywords and slot/port or number
information:
• For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
Defaults none
Command
Modes
EXEC
EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
188