Dell PowerEdge FX2/FX2s User Manual

Page 43

boot

for the current boot configuration

ftp

for the current FTP configuration

igmp

for the current IGMP configuration

interface

for the current interface configuration

line

for the current line configuration

lldp

for the current lldp configuration

logging

for the current logging configuration

management-
route

for the current Management port
forwarding configuration

monitor

for the current Monitor configuration

snmp

for the current SNMP configuration

uplink-
state-group

for the uplink state group
configuration

users

for the current users configuration

configured

(OPTIONAL) Enter the keyword configured to display line
card interfaces with non-default configurations only.

status

(OPTIONAL) Enter the keyword status to display the
checksum for the running configuration and the start-up
configuration.

Command
Modes

EXEC Privilege

Command
History

Version 9.4(0.0)

Supported on the FN I/O aggregator.

Example

Dell#show running-config

Current Configuration ...

! Version 9-4(0-180)

boot system stack-unit 0 primary tftp://10.11.8.12/dv-ci-stomp-

tc-1-a1

redundancy auto-synchronize full

hostname Dell

...

Example

Dell#show running-config status

running-config bytes 5063, checksum 0xF6F801AC

startup-config bytes 4835, checksum 0x764D3787

Dell#

Usage
Information

The status option allows you to display the size and checksum of the running
configuration and the startup configuration.