Dell PowerEdge FX2/FX2s - Manual (Page 389)

Oper-State DOWN
Members
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show fc sw
Display the switch configuration for Fibre Channel capability.
Syntax show fc sw
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.6(0.0) Supported on the FN2210S Aggregator.
Version 9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE
Switch with the FC Flex IO module.
Example
Dell(conf)#do show fc sw
Switch Mode : NPG
Switch WWN : 10:00:00:1e:c9:f1:00:d7
show npiv devices
Display the FCoE and FC devices currently logged in to an M I/O Aggregator and MXL 10/40GbE Switch
with the FC Flex IO module NPIV proxy gateway.
Syntax show npiv devices [brief]
Parameters
brief Displays an overview of current server CNA-fabric
connections over an M I/O Aggregator and MXL 10/40GbE
Switch with the FC Flex IO module NPIV proxy gateway.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE
Switch with the FC Flex IO module.
Usage
Information
Use the show npiv devices command to display information on the server CNA,
server-facing Ethernet and fabric-facing FC ports, and the SAN fabric in each
server-fabric connection over an M I/O Aggregator and MXL 10/40GbE Switch with
the FC Flex IO module NPIV proxy gateway.
389