Dell PowerEdge FX2/FX2s - Manual (Page 330)

------------------------
1 Success
Power-cycling the unit(s).
Dell#
show boot system
Displays information about boot images currently configured on the system.
Syntax show boot system stack-unit {0-5 | all}
Parameters
0–5 Enter this information to display the boot image information
of only the entered stack-unit.
all Enter the keyword all to display the boot image information
of all the stack-units in the stack.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#show boot system stack-unit all
Current system image information in the system:
=============================================
Type Boot Type A B
---------------------------------------------
Stack-unit 0 is not present.
Stack-unit 1 DOWNLOAD BOOT 9-1-0-218 9-1-0-202
Stack-unit 2 is not present.
Stack-unit 3 is not present.
Stack-unit 4 is not present.
Stack-unit 5 is not present.
show file
Displays contents of a text file in the local filesystem.
Syntax show file url
Parameters
url Enter one of the following:
• For a file on the internal Flash, enter flash:// then the
filename.
• For a file on the external Flash, enter usbflash:// then
the filename.
Command
Modes EXEC Privilege
330