Logging hostname, Logging monitor – Dell PowerEdge FX2/FX2s User Manual

Page 240

logging hostname

Configure an IP address or host name of a Syslog server where logging messages are sent. Multiple
logging servers of both IPv4 and/or IPv6 can be configured.

Syntax

logging {ipv4-address | hostname}
To disable logging, use the no logging command.

Parameters

ipv4-address

Enter the IPv4 address (A.B.C.D).

hostname

Enter the name of a host already configured and recognized
by the switch.

Defaults

Disabled.

Command
Modes

CONFIGURATION

Command
History

Version 9.4(0.0)

Supported on the FN I/O aggregator.

logging monitor

Specify which messages are logged to Telnet applications.

Syntax

logging monitor [level]
To disable logging to terminal connections, use the no logging monitor
command.

Parameters

level

Indicate a value from 0 to 7 or enter one of the following
parameters: emergencies, alerts, critical, errors,
warnings, notifications, informational, or
debugging. The default is 7 or debugging.