Dell PowerEdge FX2/FX2s - Manual (Page 335)

Command
Fields
Lines Beginning
With Description
Dell Force10
Network... Name of the operating system
Dell Force10
Operating... OS version number
Dell Force10
Application... Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell Force10
uptime is... Amount of time the system has been up
System image... Image file name
Chassis Type: System type
Control
Processor:... Control processor information and amount of memory on
processor
256M bytes... Amount of boot flash memory on the system
1 34 Port Hardware configuration of the system, including the
number and type of physical interfaces available
upgrade boot
Upgrade the bootflash image or bootselector image.
Syntax upgrade boot {all | bootflash-image | bootselector-image}
stack-unit {0-5 | all} {booted | flash: |ftp: | tftp: |
usbflash:} (A: | B:}
Parameters
all Enter the keyword all to change both the bootflash and
bootselecter images.
bootflash-
image Enter the keywords bootflash-image to change the
bootflash image.
bootselector-
image Enter the keywords bootselector-image to change the
bootselector image.
0–5 Enter the keyword 0–5 to upgrade only the mentioned
stack-unit.
all Enter the keyword all to upgrade all the member stack-
units.
booted Enter the keyword booted to upgrade from the current
image in the I/O Aggregator.
335