Dell PowerEdge FX2/FX2s - Manual (Page 294)

FCoE MAC : 0e:fc:03:01:02:02
FC-ID : 01:02:01
LoginMethod : FDISC
Secs : 5593
Status : LOGGED_IN
Related
Commands
dcb-map — creates a DCB map to configure DCB parameters on Ethernet ports
that support converged Ethernet traffic.
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show running-config fcoe-map
Displays the current fcoe-map configurations.
Syntax show running-config fcoe-map
Command
Modes EXEC Privilege
Command
History
Version 9.6(0.0) Supported on the FN2210S Aggregator.
Version 9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE
Switch with the FC Flex IO module.
Example
Dell(conf)#do show running-config fcoe-map
!
fcoe-map map
fc-map 0efc00
fabric-id 100 vlan 100
294