Dell PowerEdge FX2/FX2s - Manual (Page 320)

clear ip dhcp client statistics
Displays DHCP client statistics, including the number of DHCP messages sent and received on an
interface.
Syntax clear ip dhcp client statistics interface type slot/port
Parameters
interface type
slot/port Clear DHCP client statistics on the specified interface.
• For the management interface on the stack-unit, enter
the keyword managementethernet followed by slot/
port information. The slot and port range is 0.
• For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
Command
Modes EXEC Privilege
Default None
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
debug ip dhcp client
Enable the display of log messages for all DHCP packets sent and received on DHCP client interfaces or
for the following events on DHCP client interfaces:
• IP address acquisition
• IP address release
• Renewal of IP address and lease time
• Release of an IP address
Syntax debug ip dhcp client { events [interface type slot/port] |
packets [interface type slot/port]}
Parameters
interface type
slot/port
Display log messages for DHCP packets sent and received on
the specified interface.
• For the management interface on the stack-unit, enter
the keyword managementethernet followed by slot/
port information. The slot and port range is 0
• For a VLAN, enter the keyword vlan followed by a
number from 1 to 4094.
Command
Modes EXEC Privilege
Default None
320