Dell PowerEdge FX2/FX2s - Manual (Page 114)

Parameters
interface type
slot/port
Display log messages for DHCP packets sent and received on
the specified interface.
• For the management interface on the stack-unit, enter
the keyword managementethernet followed by slot/
port information. The slot and port range is 0
• For a VLAN, enter the keyword vlan followed by a
number from 1 to 4094.
Command
Modes EXEC Privilege
Default None
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
ip address dhcp
Acquire an IP address dynamically on an interface from the DHCP server.
Syntax ip address dhcp
To disable DHCP Client on an interface, use the no ip address dhcp command.
Command
Modes INTERFACE
Default Enabled
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information
In the I/O Aggregator, the DHCP client is enabled only on the default VLAN and
management interface 0/0. Use the ip address command to assign a static IP
address that overwrites the dynamically assigned IP address.
release dhcp interface
Release the dynamically-acquired IP address on an Ethernet interface while retaining the DHCP client
configuration on the interface.
Syntax release dhcp interface type slot/port
114