Dell PowerEdge FX2/FX2s - Manual (Page 328)

rename
Rename a file in the local file system.
Syntax rename url url
Parameters
url Enter the following keywords and a filename:
• For a file on the internal Flash, enter flash:// then the
filename.
• For a file on an external USB drive, enter usbflash://
then the filename.
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
restore factory-defaults
Restore factory defaults.
Syntax restore factory-defaults stack-unit id {clear-all | nvram}
Parameters
factory-
defaults Return the system to its factory default mode.
id Enter the stack member unit identifier to restore the
mentioned stack-unit. The range is from 0 to 6. Enter the
keyword all to restore all units in the stack.
clear-all Enter the keywords clear-all to reset the NvRAM and the
system startup configuration.
nvram Enter the keyword nvram to reset the NvRAM only.
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information
Restoring factory defaults deletes the existing startup configuration and all
persistent settings (stacking, fanout, and so forth).
When restoring all units in a stack, all the units in the stack are placed into stand-
alone mode.
When restoring a single unit in a stack, that unit placed in stand-alone mode. No
other units in the stack are affected.
328