Quality of service (qos), Policy-based qos commands, Show qos dcb-map – Dell PowerEdge FX2/FX2s User Manual
Page 207: 20 quality of service (qos)
20
Quality of Service (QoS)
The Dell Networking OS commands for quality of service (QoS) include traffic conditioning and
congestion control.
This chapter contains the following section:
•
Policy-Based QoS Commands
Policy-based QoS is not supported on logical interfaces, such as port-channels, VLANs, or Loopbacks.
The commands are:
•
•
show qos dcb-map
Display the DCB parameters configured in a specified DCB map.
Syntax
show qos dcb-map map-name
Parameters
map-name
Displays the PFC and ETS parameters configured in the
specified map.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
Usage
Information
Use the show qos dcb-map command to display the enhanced transmission
selection (ETS) and priority-based flow control (PFC) parameters used to configure
server-facing Ethernet ports.
The following table describes the show qos dcb-map output shown in the
example below.
207