Dell PowerEdge FX2/FX2s - Manual (Page 179)

Last Change
----------- ------- -----------
-----------
*S 0.0.0.0/0 via 10.10.91.9, Te 1/2 1/0
3d2h
Dell#
show tcp statistics
View information on TCP traffic through the switch.
Syntax show tcp statistics
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information The following describes the show tcp statistics cp command shown in the
following example.
Field Description
Rcvd: Displays the number and types of TCP packets received by
the switch.
• Total = total packets received
• no port = number of packets received with no
designated port
0 checksum
error... Displays the number of packets received with the following:
• checksum errors
• bad offset to data
• too short
329 packets... Displays the number of packets and bytes received in
sequence.
17 dup... Displays the number of duplicate packets and bytes
received.
0 partially... Displays the number of partially duplicated packets and
bytes received.
7 out-of-order... Displays the number of packets and bytes received out of
order.
0 packets with
data after window Displays the number of packets and bytes received that
exceed the switch’s window size.
179