Dell PowerEdge FX2/FX2s - Manual (Page 122)

show fip-snooping sessions
Displays information on FIP-snooped sessions on all VLANs or a specified VLAN, including the ENode
interface and MAC address, the FCF interface and MAC address, VLAN ID, FCoE MAC address and FCoE
session ID number (FC-ID), worldwide node name (WWNN) and the worldwide port name (WWPN).
Syntax show fip-snooping sessions[interface vlan vlan-id]
Parameters
vlan-id Enter the vlan-id of the specified VLAN to be displayed.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information
The following describes the show fip-snooping sessions command shown in
the following example.
Field Description
ENode MAC MAC address of the ENode.
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF.
FC Interface Slot/ port number of the interface to which the FCF is
connected.
VLAN VLAN ID number used by the session.
FCoE MAC MAC address of the FCoE session assigned by the FCF.
FC-ID Fibre Channel ID assigned by the FCF.
Port WWPN Worldwide port name of the CNA port.
Port WWNN Worldwide node name of the CNA port.
Example
Dell#show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN
FCoE MAC FC-ID
00:0e:1e:0c:54:a6 Te 0/1 00:05:73:f2:4f:ae Po128 100 0e:fc:
00:9a:00:27 9a:00:27 20:01:00:0e:1e:0c:54:a6
00:0e:1e:06:01:5e Te 0/3 00:05:73:f2:4f:af Po128 100 0e:fc:
00:9a:01:18 9a:01:18 20:01:00:0e:1e:06:01:5
Port WWNN
20:00:00:0e:1e:0c:54:a6
20:00:00:0e:1e:0c:54:a6
122