Dell PowerEdge FX2/FX2s - Manual (Page 283)

show hardware system-flow
Display Layer 2 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax show hardware system-flow layer2 stack-unit 0–5 port-set 0–0
[counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe,
display which system flow entry the packet hits and what
queue the packet takes as it dumps the raw system flow
tables.
stack-unit 0–5 Enter the keywords stack-unit then 0 to 5 to select a
stack member ID.
port-set 0–0
[counters]
Enter the keywords port-set with a port-pipe number—0.
(OPTIONAL) Enter the keyword counters to display hit
counters for the selected ACL or QoS option.
Defaults none
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#show hardware system-flow layer2 stack-unit 0 port-set 0
counters
---------------------------------------------------------------
------------
EntryId
Description #HITS
---------------------------------------------------------------
------------
767 LLDP BPDU
Redirects 2611
765 LACP traffic
Redirects 250
763 ARP Reply
Redirects 0
762 Slow Protocol
Drops 1155
758 OSPFv3 Multicast
[33:33:00:00:00:06] 0
759 OSPFv3 Multicast
[33:33:00:00:00:05] 0
756 GRAT
ARP 0
711 VLT ARP Replies for
Peer 0
710 ICL
Hellos 0
709 ICL MAC SYNC
Frames 0
283