Dell PowerEdge FX2/FX2s - Manual (Page 421)

Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.6.
(0.0) Supported on the FN I/O Aggregator.
Usage
Information
This command is supported on the FN410S and the FN410T Aggregators.
The following describes the show interfaces command shown in the following
example.
Field Description
Topology Lists the topology of stack ports connected: Ring, Daisy
chain, or Standalone.
Interface The unit/port ID of the connected stack port on this unit.
Link Speed Link Speed of the stack port (10) in Gb/s.
Admin Status The only currently listed status is Up.
Connection The stack port ID to which this unit’s stack port is
connected.
Example
Dell# show system stack-ports
Topology: Ring
Interface Connection Link Speed Admin Link Trunk
(Gb/s) Status Status Group
0/9 10 up down
0/10 1/10 10 up up
1/9 10 up down
1/10 0/10 10 up up
Dell#
Example
(Status)
Dell# show system stack-ports status
Topology: Daisy chain
Interface Link Speed Admin Link Trunk
(Gb/s) Status Status Group
0/9 10 up down
0/10 10 up up
1/9 10 up down
1/10 10 up up
Example
(Topology)
Dell# show system stack-ports topology
Topology: Daisy chain
Interface Connection Trunk
Group
0/9
0/9 1/10
1/10
1/10 0/10
Dell #
421