Dell PowerEdge FX2/FX2s - Manual (Page 66)

===========================
Total(b) Used(b) Free(b) Lowest(b)
Largest(b)
2147483648 9841262 2137642386 2134478662
2137642386
show processes cpu
Display CPU usage information based on processes running.
Syntax show processes cpu [management-unit 1-99 [details] | stack-unit
0–5 | summary ]
Parameters
management-
unit 1-99
[details] (OPTIONAL) Display processes running in the control
processor. The 1-99 variable sets the number of tasks to
display in order of the highest CPU usage in the past five (5)
seconds. Add the keyword details to display all running
processes (except sysdlp). Refer to Example (management-
unit).
stack-unit 0–5 (OPTIONAL) Enter the keywords stack-unit then the stack
member ID. The range is from 0 to 5.
As an option of the show processes cpu command, this
option displays CPU usage for the designated stack member.
Or, as an option of memory, this option limits the output of
memory statistics to the designated stack member. Refer to
Example (stack-unit).
summary (OPTIONAL) Enter the keyword summary to view a summary
view CPU utilization of processes related to line card
processing. Refer to Example (summary).
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
(summary)
Dell#show processes cpu summary
CPU utilization 5Sec 1Min 5Min
-------------------------------------------
UNIT1 4% 3% 2%
Example
(management-
unit)
Dell#show processes cpu management-unit 5
CPU utilization for five seconds: 4%/0%; one minute: 4%; five
minutes: 4%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY
Process
66