Dell PowerEdge FX2/FX2s - Manual (Page 159)

802.1QTagged: Hybrid
IO-AGG port mode: Auto VLANs enabled
Vlan membership:
Q Vlans
U 1
T 2-4094
Native VlanId: 1.
Name: TenGigabitEthernet 0/2
802.1QTagged: Hybrid
IO-AGG port mode: Auto VLANs enabled
Vlan membership:
Q Vlans
U 1
T 2-4094
Native VlanId: 1.
--More--
Related
Commands
show ip interface — displays Layer 3 information about the interfaces.
show tdr
Displays the TDR test results.
Syntax show tdr interface
Parameters
interface Enter the keyword TenGigabitEthernet followed by the
slot/port information for the 100/1000/10 GbaseT Ethernet
interface.
Defaults none
Command
Modes EXEC
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information If the TDR test has not been run, an error message is generated:
%Error: Please run the TDR test first
The following describes the TDR test status.
Status Definition
OK Status:
Terminated TDR test is complete, no fault is detected on the cable, and
the test is terminated.
Length: 92 (+/- 1)
meters, Status:
Shorted A short is detected on the cable. The location, in this
Example is 92 meters. The short is accurate to plus or minus
one meter.
159