Dell PowerEdge FX2/FX2s - Manual (Page 85)

undebug all
Disable all debug operations on the system.
Syntax undebug all
Defaults none
Command
Modes
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
write
Copy the current configuration to either the startup-configuration file or the terminal.
Syntax write {memory | terminal}
Parameters
memory
Enter the keyword memory to copy the current running
configuration to the startup configuration file. This
command is similar to the copy running-config
startup-config command.
terminal Enter the keyword terminal to copy the current running
configuration to the terminal. This command is similar to the
show running-configcommand.
Command
Modes
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information The write memory command saves the running-configuration to the file labeled
startup-configuration. When using a LOCAL CONFIG FILE other than the startup-
config not named “startup-configuration”, the running-config is not saved to that
file; use the copy command to save any running-configuration changes to that
local file.
85