Dell PowerEdge FX2/FX2s - Manual (Page 120)

show fip-snooping config
Displays the FIP snooping status and configured FC-MAP values.
Syntax show fip-snooping config
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
Maximum Sessions Per Enode Mac: 32
Dell#
show fip-snooping enode
Displays information on the ENodes in FIP-snooped sessions, including the ENode interface and MAC
address, FCF MAC address, VLAN ID, and FC-ID.
Syntax show fip-snooping enode [enode-mac-address]
Parameters
enode-mac-
address Enter the MAC address of the ENodes to be displayed.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information
The following describes the show fip-snooping enode command shown in the
following example.
Field Description
ENode MAC MAC address of the ENode
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF
VLAN VLAN ID number used by the session
FC-ID Fibre Channel session ID assigned by the FCF.
120