Dell PowerEdge FX2/FX2s - Manual (Page 37)

Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#pwd
flash:
Dell#
Related
Commands cd – changes the directory.
rename
Rename a file in the local file system.
Syntax rename url url
Parameters
url Enter the following keywords and a filename:
• For a file on the internal Flash, enter flash:// then the
filename.
• For a file on an external USB drive, enter usbflash://
then the filename.
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
restore factory-defaults
Restore factory defaults.
Syntax restore factory-defaults stack-unit id {clear-all | nvram}
Parameters
factory-
defaults Return the system to its factory default mode.
id Enter the stack member unit identifier to restore the
mentioned stack-unit. The range is from 0 to 6. Enter the
keyword all to restore all units in the stack.
clear-all Enter the keywords clear-all to reset the NvRAM and the
system startup configuration.
37