Dell PowerEdge FX2/FX2s - Manual (Page 189)

io-aggregator auto-lag enable
Enable auto-lag globally on the server facing ports
Syntax io-aggregator auto-lag enable
To disable the auto-lag, use the no io-aggregator auto-lag enable
command.
When disabled, all the server ports associated in a LAG are removed and the LAG
itself gets removed. Any LACPDUs received on the server ports are discarded.
Defaults Enabled
Command
Modes CONFIGURATION
Command
History
Version 9.6.
(0.0) Supported on the FN I/O Aggregator.
Version 9.6.
(0.0) Supported on the M I/O Aggregator.
Related
Commands show io-aggregator auto-lag status —displays global information on the auto-lag
status.
Usage
Information This command is supported in Standalone, Stacking, and VLT modes.
show io-aggregator auto-lag status
Displays global information on the auto-lag status.
Syntax show io-aggregator auto-lag status
Command
Modes EXEC
Command
History
Version 9.6(0.0) Supported on the FN I/O Aggregator.
Version 9.6(0.0) Supported on the M I/O Aggregator.
Example
Dell-ct-mxl-1-b1(conf)#do show io-aggregator auto-lag status
Auto LAG creation on server port(s) is disabled
189